Silica Fume
Silica fume, a co-product from the production of silicon or ferrosilicon metal, is an amorphous silicon dioxide - SiO2 which is generated as a gas in submerged electrical arc furnaces during the reduction of very pure quartz. This gas vapor is condensed in bag house collectors as very fine powder of spherical particles that average 0.1 to 0.3 microns in diameter with a surface area of 17 to 30 m2/g. Silica fume is used in a variety of cementitious (concrete, grouts and mortars), refractory, elastomer and polymer applications.
Silica Fume Production
Silica fume is a mineral admixture, composed of submicron particles (100 to 150 times smaller than a grain of cement) of amorphous silicon dioxide. Silica fume powder is gray to off-white in color, and is available in several product forms and packaging options. Our products include:
* Undensified Silica Fume
* Densified Silica Fume
* Corrochem (mineral & chemical admixture)
* Norad (superplasticizer)
Silica FumeWhen used in cementitious applications (concrete, shotcrete, repair products and oil well grouts.), silica fume acts as both a filler - improving the physical structure by occupying the spaces between the cement particles - and as a “pozzolan” reacting chemically to impart far greater strength and durability to concrete.
In refractory and ceramic applications silica fume is used for its’ ability to modified flow characteristics and for the unique particle packing ability.
Source:
Monday, January 19, 2009
Silica fume India
Silica fume is a byproduct of producing silicon metal or ferrosilicon alloys. One of the most beneficial uses for silica fume is in concrete. Because of its chemical and physical properties, it is a very reactive pozzolan. Concrete containing silica fume can have very high strength and can be very durable. Silica fume is available from suppliers of concrete admixtures and, when specified, is simply added during concrete production. Placing, finishing, and curing silica-fume concrete require special attention on the part of the concrete contractor.
Silicon metal and alloys are produced in electric furnaces as shown in this photo. The raw materials are quartz, coal, and woodchips. The smoke that results from furnace operation is collected and sold as silica fume, rather than being landfilled. Perhaps the most important use of this material is as a mineral admixture in concrete.
Silica fume consists primarily of amorphous (non-crystalline) silicon dioxide (SiO2). The individual particles are extremely small, approximately 1/100th the size of an average cement particle. Because of its fine particles, large surface area, and the high SiO2 content, silica fume is a very reactive pozzolan when used in concrete. The quality of silica fume is specified by ASTM C 1240 and AASHTO M 307.
High-strength concrete is a very economical material for carrying vertical loads in high-rise structures. Until a few years ago, 6,000 psi concrete was considered to be high strength. Today, using silica fume, concrete with compressive strength in excess of 15,000 psi can be readily produced. The structure shown at the above right used silica-fume concrete with a specified compressive strength of 12,000 psi in columns reaching from the ground through the 57th story.
The greatest cause of concrete deterioration in the US today is corrosion induced by deicing or marine salts. Silica-fume concrete with a low water content is highly resistant to penetration by chloride ions. More and more transportation agencies are using silica fume in their concrete for construction of new bridges or rehabilitation of existing structures.
Silica-fume concrete does not just happen. A specifier must make a conscious decision to include it in concrete to achieve desired concrete properties. Assistance in specifying silica-fume concrete for high strength or increased durability can be obtained from the SFA or from major admixture suppliers.
Silica fume for use in concrete is available in wet or dry forms. It is usually added during concrete production at a concrete plant as shown in the photo. Silica fume-concrete has been successfully produced in both central-mix and dry-batch plants. Assistance is readily available on all aspects of handling silica fume and using it to produce consistent, high-quality concrete.
Silica-fume concrete should be transported, placed, finished, and cured following the good concreting practices outlined by the American Concrete Institute. Flatwork containing silica fume concrete generally requires less finishing effort than conventional concrete. The photo shows the "one-pass" finishing process in which the silica-fume concrete is placed, consolidated, and textured with little or no waiting time between operations. To gain the most benefits from using silica fume, the concrete must be cured effectively. The SFA or your concrete supplier can provide any necessary assistance concerning construction operations.
Silicon metal and alloys are produced in electric furnaces as shown in this photo. The raw materials are quartz, coal, and woodchips. The smoke that results from furnace operation is collected and sold as silica fume, rather than being landfilled. Perhaps the most important use of this material is as a mineral admixture in concrete.
Silica fume consists primarily of amorphous (non-crystalline) silicon dioxide (SiO2). The individual particles are extremely small, approximately 1/100th the size of an average cement particle. Because of its fine particles, large surface area, and the high SiO2 content, silica fume is a very reactive pozzolan when used in concrete. The quality of silica fume is specified by ASTM C 1240 and AASHTO M 307.
High-strength concrete is a very economical material for carrying vertical loads in high-rise structures. Until a few years ago, 6,000 psi concrete was considered to be high strength. Today, using silica fume, concrete with compressive strength in excess of 15,000 psi can be readily produced. The structure shown at the above right used silica-fume concrete with a specified compressive strength of 12,000 psi in columns reaching from the ground through the 57th story.
The greatest cause of concrete deterioration in the US today is corrosion induced by deicing or marine salts. Silica-fume concrete with a low water content is highly resistant to penetration by chloride ions. More and more transportation agencies are using silica fume in their concrete for construction of new bridges or rehabilitation of existing structures.
Silica-fume concrete does not just happen. A specifier must make a conscious decision to include it in concrete to achieve desired concrete properties. Assistance in specifying silica-fume concrete for high strength or increased durability can be obtained from the SFA or from major admixture suppliers.
Silica fume for use in concrete is available in wet or dry forms. It is usually added during concrete production at a concrete plant as shown in the photo. Silica fume-concrete has been successfully produced in both central-mix and dry-batch plants. Assistance is readily available on all aspects of handling silica fume and using it to produce consistent, high-quality concrete.
Silica-fume concrete should be transported, placed, finished, and cured following the good concreting practices outlined by the American Concrete Institute. Flatwork containing silica fume concrete generally requires less finishing effort than conventional concrete. The photo shows the "one-pass" finishing process in which the silica-fume concrete is placed, consolidated, and textured with little or no waiting time between operations. To gain the most benefits from using silica fume, the concrete must be cured effectively. The SFA or your concrete supplier can provide any necessary assistance concerning construction operations.
Wednesday, December 17, 2008
Subscribe to:
Posts (Atom)